Complex wiring systems require a single point to consolidate large and small conductors. The PowerBar 1000 offers a 1,000 Amp busbar with various size studs and screws to connect conductors and fuse blocks. - 1,000 Amp busbar for large complex wiring systems - Tin plated pure electrical copper for maximum conductivity - Stepped bus design offers two elevations for conductors which doubles the density of the wire loom compared to traditional bus bars - Busbar and fuse block elevations match common fuse blocks allowing for multiple fuse block attachment, eliminating the need for connecting cables - One-piece serrated flange nuts ensure correct and secure connections - Stainless steel 8-32 screws with captive lock washers for securing smaller gauge wires - Busbar may be cut to a shorter length to accommodate constricted spaces - Bi-directional busbar end caps allow the ganging of additional busbars - Snap on insulating cover meets ABYC and USCG requirements and includes label recess

- Designed for C-Series Toggle Circuit Breakers - Heavy 1/8" aluminum 5052 Alloy - Two-part polyurethane slate gray finish - Accepts standard Blue Sea Systems" backlight labels - Accepts standard Blue Sea Systems" "ON" indication LEDs

- All positive, negative and grounding buses installed, fully pre-wired - Panels with meters include toggle switch for mounting up to 3 battery banks - All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters) - All circuit label positions are backlit on standard panels - No kit required - "ON" indicating LEDs installed in all circuit positions

- 4 to 32 branch circuits with installed 15 Ampere circuit breakers - Available with voltmeters, ammeters, and digital multimeters - Includes 4205—Square Format Label Set

- 38 AC Panels may be equipped with main breakers up to 100A per pole to suit the application - AC and DC panel amperage determined by AC Main and DC Main circuit breakers - Modular manufacturing design reduces manufacturing time - Interchangeable modular design eliminates custom engineering and metal fabrication - Flexible modifications - Flexible panel orientation (panels without meters)

- 360 AC Panels may be equipped with main breakers up to 100A per pole to suit the application - AC and DC panel amperage determined by AC Main and DC Main circuit breakers - Modular manufacturing design reduces manufacturing time - Interchangeable modular design eliminates custom engineering and metal fabrication - Flexible modifications - Flexible panel orientation (panels without meters)

No description available.

No description available.

Enables backlighting for the Push Button Reset-Only Circuit Breaker and Rocker Switch 360 Panels

- All AC and DC buses installed and fully pre-wired - Label backlighting pre-installed - ON - indicating LEDs installed in all circuit positions - 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch

- All AC and DC buses installed and fully pre-wired - Label backlighting pre-installed - ON - indicating LEDs installed in all circuit positions - 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch

- Isolation of 360 panel AC components and circuits from DC system elements - Meets ABYC safety requirements for panels with combined AC and DC loads - Provides mechanical protection for panel backs protruding into lockers - Modular design consists of three different interlocking components—SIDE, TOP, and END - Interlocking companion pieces SIDE, TOP, and END can be stacked to accommodate large AC components - Cover breakouts allow wire access in any direction

- All AC and DC buses installed and fully pre-wired - Label backlighting pre-installed - ON - indicating LEDs installed in all circuit positions - 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch - Maximum panel amperage - 100 Amperes DC, 50 Amperes AC - MIL-C5541C or equivalent immersion undercoating for lifetime corrosion resistance - Two-part polyurethane slate gray finish - Heavy 1/8" aluminum 5052 alloy - Detailed installation instructions and cutout template included - Countersunk mounting holes throughout - Includes set of 60 common AC and DC Large Format Labels - Over 500 individual labels available

- All AC and DC buses installed and fully pre-wired - Label backlighting pre-installed - ON - indicating LEDs installed in all circuit positions - 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch

- All AC and DC buses installed and fully pre-wired - Label backlighting pre-installed - ON - indicating LEDs installed in all circuit positions - 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch

- All AC and DC buses installed and fully pre-wired - Label backlighting pre-installed - ON - indicating LEDs installed in all circuit positions - 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch

- All AC and DC buses installed and fully pre-wired - Label backlighting pre-installed - ON - indicating LEDs installed in all circuit positions - 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch

- All AC and DC buses installed and fully pre-wired - Label backlighting pre-installed - ON - indicating LEDs installed in all circuit positions - 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch

- Switches 3 - 240 Volt AC sources - Two-part polyurethane slate gray finish - Heavy 1/8" aluminum 5052 alloy - Red reverse polarity LED indicators - Green power available LED indicators - Compact solution when circuit protection is provided elsewhere - Allows connecting one of two or three different AC sources to one circuit

- Easily installed in Blue Sea Systems’ circuit breaker panels - Connects to 12 or 24 Volt sources via two 6" 18 AWG wire leads - Backlighting is standard on panels - No kit required - Reverse polarity protection built-in

No description available.

- Easily add positive and negative busbars directly to a threaded-post battery terminal - Tin-plated pure electrical copper for maximum conductivity - Insulating covers meet ABYC/USCG insulation requirements - Screw terminals for securing wires - Includes four 16-14 AWG and four 12-10 AWG Nylon insulated ring terminals

- 60 common DC labels. - Reinforced, weatherproof material - Used on all Contura Waterproof Circuit Breaker Panels - Used on Contura Waterproof Fuse Panels - Used on ST Blade Fuse Blocks

Insulates single stud on alternators, starters, windlasses and high amperage termination points - Insulate stud type connectors on alternators, starters, windlasses and other high amperage devices

Insulates single stud on alternators, starters, windlasses and high amperage termination points - Insulate stud type connectors on alternators, starters, windlasses and other high amperage devices

- Great for limited space applications

- Great for limited space applications

- Great for limited space applications

- Great for limited space applications

- Great for limited space applications